Track Machine Quiz – 31 इस प्लेटफार्म पर आपको ट्रैक मशीन से संबंधित ऑब्जेक्टिव टाइप्स महत्वपूर्ण प्रश्न और उत्तर मिलेगे।
Track Machine Quiz – 31
#1. For new line, doubling and gauge conversion clean ballast cushion before under taking tamping of loop line by machine should have—
#2. The grease used for automatic greasing system on tamping machines.
#3. Suction filters are replaced at……. hours in CSM.
#4. In plasser make new duomatic machine pneumatic brake is applied automatically by switching off ——–
#5. The SUN diesel engine on PRCT28.
#6. In Levelling of track, reference rail in curves is selected as ——–
#7. Which of the following the function of tamping machine.
#8. Battery is charged with—–
#9. Tamping depth for 60 kg rail and sleeper.
#10. Battery gives voltage.
#11. Quantum Of General Lift is limited to. (as per IRTMM)
#12. The crawler chain tensioning in PRC T 28 is achieved by ———–
#13. The maximum speed with full load of PRC T28 crane.
#14. Criteria for selecting the reference rail in straight.
#15. Lube oil with filters are to be replaced in Cummins engine.
#16. With the Tamping units used in IR ,maximum sleepers can be tamped at a time.
#17. Tamping tool depth means—–
#18. For new lines and gauge conversion before undertaking tamping by machine minimum ballast cushion required in main line.
#19. After replacing valve flushing must be done.
#20. For effective tamping, the gap between top of the tamping tool blade and bottom of sleeper should have……… for PSC sleeper as per IRTMM.
#21. Vibration frequency of tamping tool.
#22. Which of the following machine is having the provision of operating individual tamping tool.
#23. Tamping tools to be replaced after……… % of wear of tool blade.
#24. Changing of oil of vibration shaft main bearing is carried out in schedule as per RDSO.
#25. Which of the following is Pneumatic application.
Results
Congratulation.
दोस्तो उम्मीद है आज आपको ये क्विज अच्छा लगा होगा। अगर आपके अभी भी कोई सवाल इंजीनियरिंग से जुड़े है, तो आप हमे कमेन्ट करके जरूर बताये।
टेक बासुदेव (Tech Basudeo) से जुड़ने के लिए आपका धन्यवाद। 🙂
अगर आप टेक्निकल की वीडि मे देखना पसन्द करते है, तो आप हमारे YouTube Channel Tech Basudeo को जरूर विजिट करे।
अन्य क्विज –
अन्य पढ़ें –