Track Machine Quiz – 33 इस प्लेटफार्म पर आपको ट्रैक मशीन से संबंधित ऑब्जेक्टिव टाइप्स महत्वपूर्ण प्रश्न और उत्तर मिलेगे।
Track Machine Quiz – 33
#1. Brake block clearance is adjusted in…… schedule for DUO/CSM as per RDSO
#2. Full form of GVA is
#3. Minimum sieve size in BCM as per IRTMM
#4. Cause for white smoke emission on a diesel engine indicates.
#5. During lining ,if the track is springing back is compensated by switching on ——-
#6. RPM of engine radiator fan should not be less than…… RPM for proper cooling for CSM
#7. Hydraulic tank in cleaned at-
#8. Water content in water glycol fluid used in RGM-
#9. In BCM the cutter chain is driven by——–
#10. In BCM Excavation depth of ballast under the sleeper is up to…. mm.
#11. Emergency engine available on T-28
#12. The amplitude of tamping tool on tamping machine.
#13. TRT Means
#14. ZF-gear box drive on CSM is called
#15. Minimum ballast cushion for deploying tamping machine is
#16. For general lift of run-in and run-out ramp for tamping is
#17. The stipulated output of 3X per effective block hour is
#18. Emission of black smoke in a diesel engine indicates.
#19. Filter is… than strainer.
#20. …………….in the lowest temperature at which a fluid will flow-
#21. The capacity of T-28 crane.
#22. In CSM machine Hydraulic pressure fluctuations is compensated by ——-
#23. Hook is used in
#24. Schedule for first POH of track machines is
#25. No.of work drive motors in BCM.
Results
Congratulation.
दोस्तो उम्मीद है आज आपको ये क्विज अच्छा लगा होगा। अगर आपके अभी भी कोई सवाल इंजीनियरिंग से जुड़े है, तो आप हमे कमेन्ट करके जरूर बताये।
टेक बासुदेव (Tech Basudeo) से जुड़ने के लिए आपका धन्यवाद। 🙂
अगर आप टेक्निकल की वीडि मे देखना पसन्द करते है, तो आप हमारे YouTube Channel Tech Basudeo को जरूर विजिट करे।
अन्य क्विज –
अन्य पढ़ें –