Track Machine Quiz – 33 इस प्लेटफार्म पर आपको ट्रैक मशीन से संबंधित ऑब्जेक्टिव टाइप्स महत्वपूर्ण प्रश्न और उत्तर मिलेगे।
Track Machine Quiz – 33
#1. Minimum ballast cushion for deploying tamping machine is
#2. …………….in the lowest temperature at which a fluid will flow-
#3. Full form of GVA is
#4. Cause for white smoke emission on a diesel engine indicates.
#5. Hook is used in
#6. In BCM Excavation depth of ballast under the sleeper is up to…. mm.
#7. The stipulated output of 3X per effective block hour is
#8. For general lift of run-in and run-out ramp for tamping is
#9. Water content in water glycol fluid used in RGM-
#10. Hydraulic tank in cleaned at-
#11. Brake block clearance is adjusted in…… schedule for DUO/CSM as per RDSO
#12. Minimum sieve size in BCM as per IRTMM
#13. RPM of engine radiator fan should not be less than…… RPM for proper cooling for CSM
#14. During lining ,if the track is springing back is compensated by switching on ——-
#15. In CSM machine Hydraulic pressure fluctuations is compensated by ——-
#16. In BCM the cutter chain is driven by——–
#17. Emergency engine available on T-28
#18. The amplitude of tamping tool on tamping machine.
#19. No.of work drive motors in BCM.
#20. The capacity of T-28 crane.
#21. Schedule for first POH of track machines is
#22. TRT Means
#23. Filter is… than strainer.
#24. ZF-gear box drive on CSM is called
#25. Emission of black smoke in a diesel engine indicates.
Results
Congratulation.
दोस्तो उम्मीद है आज आपको ये क्विज अच्छा लगा होगा। अगर आपके अभी भी कोई सवाल इंजीनियरिंग से जुड़े है, तो आप हमे कमेन्ट करके जरूर बताये।
टेक बासुदेव (Tech Basudeo) से जुड़ने के लिए आपका धन्यवाद। 🙂
अगर आप टेक्निकल की वीडि मे देखना पसन्द करते है, तो आप हमारे YouTube Channel Tech Basudeo को जरूर विजिट करे।
अन्य क्विज –
अन्य पढ़ें –