Track Machine Quiz

Track Machine Quiz

 
QUIZ START

Results

Excellent.

Never mind you can try another time.

#1. Heavy slewing or lifting should normally be done in steps of not more than ________.

#2. The BCM (Ballast Cleaning Machine) RM 80 is powered by Two DEUTZ BF 12L 513C engine having power rating _______________.

#3. The vibration pressure Tamping machine varies from machine-to-machine and ranges from _________________.

#4. The BCM (Ballast Cleaning Machine) RM 80 is powered by Two DEUTZ BF 12L 513C engine how many cylinder.

#5. Rated Output of a CSM for effective hour

#6. Number of cutter bars to be kept with BCM during the block.

#7. Engine no.1 of BCM operates

#8. Machine used for Track consolidation.

#9. Capacity of PQRS portal crane which can lift a 13.0 m long pre-assembled panel

#10. For maintenance packing, squeezing time of _______________ should normally be adequate.

#11. In tamping machines in general lift should always be more than

#12. At present POH of tamping machines is carried out at

#13. Where is the engine of BCM imported from DEUTZ BF 12L 513C.

#14. BCM DEUTZ BF 12L 513C engine works at _______ rpm during screening and _______ rpm at idle condition.

#15. The minimum distance between the machines when working in a group shall be_________.

#16. While the track machines are moving in the block section in group, it will be the responsibility of SSE/JE/TM of these machines to maintain a minimum safe distance of ___________ from each other.

#17. The maximum width of cutter bar can be extended in BCM RM-80, 92 U.

#18. The RPM of vibrating shaft of tamping unit

#19. On 3X machine to attain perfect alignment of track system adopted

#20. When track machine is to move on wrong road (against the direction of traffic), the speed of track machine shall not exceed more than ___________ and flasher light shall be kept “ON”.

Previous
Finish

तो दोस्तो उम्मीद है आपको ये क्विज अच्छा लगा होगा। अगर आपके अभी भी कोई सवाल इंजीनियरिंग से जुड़े है, तो आप हमे कमेन्ट करके जरूर बताये।

टेक बासुदेव (Tech Basudeo) से जुड़ने के लिए आपका धन्यवाद। 🙂

अगर आप टेक्निकल की वीडियो हिन्दी मे देखना पसन्द करते है, तो आप हमारे YouTube Channel Tech Basudeo को जरूर विजिट करे।

अन्य क्विज –

Track Machine Quiz – 01

Track Machine Quiz – 02

Track Machine Quiz – 03

Track-machine-quiz-04

Track Machine Quiz – 05

Track Machine Quiz – 06

Track Machine Quiz – 07

Track Machine Quiz – 08

Track Machine Quiz – 09

Track Machine Quiz – 10

Track Machine Quiz – 11

Track Machine Quiz – 12

Track Machine Quiz – 13

Track Machine Quiz – 14

Track Machine Quiz – 15

Track Machine Quiz – 17

Track Machine Quiz – 18

Track Machine Quiz – 19

Track Machine Quiz – 20

Track Machine Quiz – 21

Track Machine Quiz – 22

Track Machine Quiz – 23

Track Machine Quiz – 24

Track Machine Quiz – 25

Track Machine Quiz – 26

Track Machine Quiz – 27

Track Machine Quiz – 28

Track Machine Quiz – 29

Track Machine Quiz – 30

अन्य पढ़ें –

Vernier Micrometer

Electric Circuit

Vernier Micrometer

Combination Set

Metal Cutting Method

Vernier Micrometer

Elements of File

Common Drilling Machine Operation

Marking Punch

Ohm’s Law

Resistance And Resistor

Electric Circuit

Wire Wounde Resistor

Resistor Connection

3 thoughts on “Track Machine Quiz”

Leave a Comment